Assembling - High Purity Water Filter, Awarded With 3 Gold Medals At The International Salons (Brussels, Geneva & Budapest) and tens of other distinctions

A Pure Water Filter, Awarded With 3 Gold Medals At The International Salons (Brussels, Geneva & Budapest) and tens of other distinctions

English	Romana
Presentation	Certificates	Diplomas	Assembling	Home	Maintenance	Products	Industry	Contact

Menu

Website traffic

Search Engine Optimization and SEO Tools

“A Pure & Affordable Water Spring”

1. Assembling possibilities:

- it can be mounted to the sink battery through an automated tap;

- it can be mounted under the sink, directly to the cold water pipe using a bypass system. For this assembly, you will need to add an additional tap on the sink, just for the filtered water. It is necessary to mount before the filter, of a pressure regulating valve which needs to be adjusted for 3 atmospheres and also of a closing tap;

- it can be mounted by using an adapter linked to the strainer of the mono-block sink;

- individual mounting from the water system;

      - as a very simple and temporarily solution, it can be very easy mounted by using the house from the shower, you need to unscrew the end of the house and screw it directly to the filter using a rubber mortar from the filter package. Take care to the water admission sign on the filter (you need to supply the water only at the end which shows an arrow like this → directed to the center of the filter:
       *   "→∏" this is the water admission point;
       *   "∏→" this is the evacuation of the pure water point;

       In this way, you can benefit of pure water right away from the moment you have purchased the filter, until a permanent mounting solution will be implemented.

For the illustrated mounting presentation, please click on the link below to download:

>>> Click here to download <<<

Good luck!

2. Instructions for using the filter:

After you have successfully mounted the filter, open the cold water tap and leave it running through the filter for about 5 to 10 minutes. After that, water is ready to be collected and used.

We recommend that before starting to filter the water, to let the water flow for about 0.5 to 1 minute so you always get fresh water.

Did you know:

A young human body contains more then 70% water? And this gets lower by age?
To be healthy, you need at least 2 litters of water per day?

References

» Reverse Osmosis disadvantages